Raspberry Pi 3 3d Printer | Riesiger Touchscreen Für Jeden 3d Drucker [tutorial / Anleitung / Repetier Server/ Raspberry Pi 3+4]

Philipps 3D Druck

Subscribe Here





Riesiger Touchscreen Für Jeden 3d Drucker [tutorial / Anleitung / Repetier Server/ Raspberry Pi 3+4]


In this video, I show you how to use this 7 inch. Touch display with a 3d printer connects [music]. [APPLAUSE] [Music]. The first you might ask yourself put is. So what do I have to be able to get this display on a 3d to build a printer? I can tell you you have to Can’t do anything because I will show you step by step in this tutorial, Exactly what you have to do. And the second question you might ask now is yes, which printer can? I connect to this display and can do so. I just tell almost everyone that I don’t have a printer in this room Can no longer connect with this bite. OK, then let’s start with the parts list. Basically, all the parts that we have for this project. I will go through the construction with you. Afterwards with the ones I designed here afterwards, We screw everything together. Connect the whole thing with the printer. I’ll show you how to do it software, and then we go through the whole menu. The display through, so let’s go. We first look at all the parts we need. Our first component is the Raspberry Pi 4 and that is our computer so to speak, which has all the data processes what we need for this project. Our little computer needs, of course, a hard drive too. And for this we use a micro SD card. 32GB Are enough here so that we can see as much as possible. I have myself decided to use a large display, namely the 7 inch touch display directly from Raspberry Pi. Also, we need a power supply here. We’re one with a little more steam. I once got here with 5.1 volts and three amt her. Then, of course, we need one USB cable to our raspberry pi immediately afterwards with our printing there too connect so that the Raspberry Pi doesn’t get too hot. I have another one here. Set of small heat sinks taken and a 40 by 40 CDR fan for assembly then. Do we need a set of screws and nuts? The software aperture server optionally, a small webcam. And, of course, the one construction by me, which we will go through again right afterwards, go so that we have a better overview of all components. I have you actually created a parts list. You can find it in the video below description as download first of all. I have the display housing. Front with four castles created to protect the display itself around walking. The case for the rest is already on the back and here are constantly clearing and breakthroughs are available around all connections can be reached without dismantling. The cover has a kind of warm structure, get for ventilation and a mounting hole for our forties October fan to be able to do without a screw connection. I designed the lid in such a way that it snaps over with the raspberry. Pi Housing can be connected. There are two options for the display to use possibility of inserting a foot with a hinge and anti-slip do use or the option of two using a side arm that is also over a hinge can be adjusted at an angle via two long holes. These arms take minutes to mount stones on almost any aluminum profile and also turn in almost every imaginable angle. I have in my construction tries to choose all tolerances in such a way that the part can be used without reworking a little air fit right into each other also. I wanted that. All parts are printable without structure, which I succeeded in doing except for the breakthrough from the Raspberry Pi housing and the arm on the side. I will also share connectors as a construction file with so that you can construct your own individual here. Now we come to the rather boring part of this tutorial and all of the links. I will include the ones used here in the video description below and First we go to the page, repetitive server and load the here image for the rest of the time he stayed under. If we did that we change once on the Ballena page and download the program here. What we do, you need the same to run the operating system on the Raspberry Pi or rather to flash the memory card here. We just have to make sure that we once our correct operating system run out because we both files downloaded. We first unpack the repeated server image file. We can delete the zip file and then install the program was Lena Eckert, depending on whether you have windows or Mac Os a little different, of course, but the installation in the end remains that same we naturally open our fresh installed program Ballena, and then select our image file off and that is, of course, the the egg repeated server point. Em, then go next. Let’s select our micro SD card and it’s in mine. If my 64 GB micro SD card, finally, we press flash. And then we have to be ready by now. Great and ready. We can do the program now. Close our display right Afterwards is displayed. We still have to carry out a very last step, and we go to the directory of the micro. We just created SD card, then search for the file confict text and open it with the text editor. Here we are now looking for the line. LCD red equals zero and we change this zero in a two save the file and throw ours micro SD card again after we have successfully printed out all parts, which is really not difficult. We now come to the real breakdown of the whole project. First of all, we unpack our 7 inch touch display and we use the red cable with the 5 volt pin and the black cable with the ground. In next, we use the display cable with the LCD touch display, insert our micro SD card into the rest of the API and unscrew the raspberry PI on the touch display. Now we plug the display cable into it. Raspberry Pi in front of you. The cable is a bit filigree and the protruding one. We simply slide the cable length between the Raspberry Pi and the touch display. Now our first two 3d printed displays are being used once hold the display and hold the case for the rest, the two cables that we initially connected to the display board. We now connect once with plus once to the top left pin and with -. Glue the fifth in the second row in between even if the one heat sink to the position provided for it next, we take care of it. The doctor lifter here. We cut off the yellow cable that we need. We don’t get electrocuted here. And now we can decide either. We solder a new t stronger one, or we can too crimping, that’s how? I do it, for example, you can use the old connector. An old tennis fan included in the scope of delivery of the doctor. Fourth rubber noses with us and we use these and put them through the lid and then through the doctor fan. And this is how it is fixed to the housing. Once we have bent or soldered the connector, the plus pin will be inserted to the second in the first row and the – pin to the third of the first row. Now we can insert the lid, including the fan into the raspberry pi housing snap and screw the two holders on top and sides as the last step now follow the side arm and the foot in which we have, the little tip can impress pieces as he now mounts the display on your printer, or it is, of course, left up to you. You can just do it yourself. Next to the printer, or you can use the arm on the side and you can give 1000 various positions on the printer. Attach the connection to the the actual printer is, of course, Super easy. You just take the USB cable, connect that with the Raspberry Pi and the actual printer and you are plugged in the USB connection from the power supply to the USB connection of the raspberry knows about that. Of course you can still make the whole look a bit nicer. Make loud cable protection around like I did, or you can make it even more elegant and sunk the cables into the aluminum profiles. You should have done everything right up to this point. This year display starts and we will be asked about it next to connect to our Wifi and for this we switch to the view. From the display we switch from our start screen to the tip from the Wifi. And now all your wlans are displayed here, which are quasi in range are here. I will mean, for example, either from the fact that this is the fritz box and here we will too already asked for our password and here we just enter and say password from our Wifi. We have entered the password. We press once to change, and now we can connect to it. If everything went well, we will see connected up here. And then your name wieland’s. When we are connected to our Wifi, we will switch back to the home tab. Write down this ip address for this IP address. We need to give it back to our computer for our web browser. We now enter the IP address, just noted in the Web browser above. If everything went well, the reporter server opens and we see that we are connected to our network. Of course we want to next integrate our printer and for this we press once at the top left. Create new printer. Now we can first name The printer in this case, call insider x1 and continue with Step 2 in step two. We now select the appropriate sequence for the time when the x1 is that the Ma Lin company, we can leave the rest and we press once on continue with Step 3 Now we see down here. Wait for connection. When we are successfully connected to our printer, we are a step 3 namely the geometry and here we can now bet enter the shape and the bag size in the case of x1 This is 300 X 300 x fi without inscription. This is about the extruder and the heated bed. We have one extruder. The filament diameter is 1.75 We already have one, so we don’t have to go further with step for step five function fan available. Yes, we have a fan like this. If everything went well, we can now, see. This dashboard here is ours Time. Want the x1 and we are also shown the temperature, so Lets. Click down to the printer here on this page. There is so an incredible number of functions that are mostly self-explanatory. Are that means here is, of course, the control here. We have the console up here. We have a problem with the speed. The fan speed the current temperatures here it’s best to simply click through it yourself. As I said, most things are self-explanatory. We’ll look at each other. Now how we send a record from our computer to the printer, We can go to the print tab here above. We now have the possibility to start direct printing up here. That means us would send our code to our printer directly from here or we would. Load a finished jackpot directly onto our using this button, Raspberry Pi. And then we can directly from the display without a computer. This code retrieve. I already have a finished file. That is the v4 cover and Well. Just select them and open them. So now we see them file is uploaded and via this button, we can now access the. Show 3d preview. So, as I said up here, you will find many you can play around with other functions now. Fine-tune all the values ​​you want for your printer, but we need to switch back to our actual LCD touch display and I’ll show you what will do there. Separately, without a computer can. OK, then let’s have a look at what he can do with this display. Can I am up here now? In the home view up here, we can see now, but the temperature of hot and and of the calorific value. Then we have various here buttons and we will now go through them in quick succession. We have here above our chips. I uploaded the Benji here again. Press it once. And now we can see here too. Once the 3d view of this one of these bands, we now have diverse one’s parameters. If I weren’t such a lazy dog ​​and, all of the parameters would be would have entered correctly. Then these values ​​would be correct here once displayed, for example, the duration of the print. How much that in the end would cost if you deposited the right price so various you can get information here. You have to stop at the information. Accordingly, we can also have a fly back on, of course, with the printer. Go through this display. Xyz everything once! Of course we already know home from the others -. Then we can, of course we can change our filament here. We can change the temperature set with which we have to change this filament. How fast or how slowly one should be executed then? We have the printer up here, which we have now set in my case. I have now used this sd card. Only the Sidewinder x1 In there. We could have several printers. We now select another printer, which became a lot about this one. USB socket can simply be connected with the next. Of course we have the status here. We can now see in extruder, the heating and the fan light. Everything that you have on? This print is displayed here that we can. Now we could change the flow from 105, for example. Let’s say 90 or we’ll go and enter another value, then if that was what? I really wanted then. We have that down here. I think that’s a lot interesting. A temperature graph here is now shown to us as it were. I think our temperature is very interesting. We show and I’ll show you someone else here. I’ll take one we can do tuning here, for example, extruder or we can do the same for the highspeed display. The next is, we can also go over USB. Just here. A finished chip to import on our police. I have no USB. Stick plugged in. Now, That’s why I don’t have a job that I do can import then. We have the console concert displayed. What ours printer actually just doing so here? All commands are spat out to us. Let’s look at each other again in a moment, then we have server comments here, so we can use the server once. Switch off or restart here. We will shortly be adding a box button introduce where we can now do the pit June, for example, right in the connection quasi as a bonus. Then we have the here as already shown temperature curves here once your settings over Wifi and completely interesting as here on the right side again that we are here on it, we see the complete second-line stocks from our printer, and we can now, for example, if we now assume we want the set Ypsilon job, then we click here simply select this value on 7 press. Enter now! We see this value has been changed and we can now go to save changes up here now. This new one is worth saved, and if we go back now and our console, then we see settings there and we have adopted. This value is a prerequisite for this. Of course that we have activated this in our company. Maybe I’ll show you another video at the time when the x1 is normally not activated for all other printers, but that’s no problem at all. Other is actually self-explanatory here. You can also simply again. Clicking through a bit and using formulas is also fun. When you are, not, everything is pre-chewed, but if you still have a little something yourself can explore as an example. I’m just going to start with the banjo print so that you can see what this surface looks like. I press up here so on print and I now say for print and so now became ours printing process. Look, we have this circle up. Here that is here. The more advanced the pressure is the more this circle as diverse information. Iz position in which altitude we are. And, of course, the temperatures have flow and speed here. For example, I connected the display to the Andy Kéint government. And even if you see that, the temperature fluctuates quite a bit here would be a picnic due. Basically, we are now done with the settings and we could now use the Raspberry Pi with the rapper server like this. But I have picked out two small causes for you. That are not needs, which I personally find very chic and the first is us. You can now petting for Scotland and also for cents and the values ​​directly on our display company and no longer need a separate computer like that. I’ll show you a computer again. That is you want it over on my screen? We are back in our dashboard from reputeer server. This is this house up here, and we take a look now here to the printer and then in the upper right corner, we click on it type and then on printer settings. Here we have now up here once this day with Jackos and down here, we find the button a new command. Now we can think of a name up here and we will name it whole now once PD hot and down here, we can now write the code to be executed, enter and the chiptuning for the hot and that we give one with m300 30 stands for the Extruder ES 230 stands for the temperature at which we do. The training want to perform, and c8 means we are doing a total of eight cycles in this one chat June. If we were to print mainly Pa, now we would be here. Enter a value of 200 degrees. I always want the temperature for tuning the I use it most often. Finally, we press save below configuration and we are already done, so we switch over again as the actual touch display back on our display. We now go to the tab print documents, and we see this new button is now here automatically added the idea hot and and if we now press it a lot, then it automatically performs these eight cycles, so lets. Just do that times as we see up here. The command has been transmitted so to speak. Now let’s go in the room and look at us the whole time in the temperature. Graphic OK with that, Our pitt tuning is finished, lets. Go now, back to home and look at the console and down here. We see now which values ​​have already been determined, namely once B and D these. We write down values ​​now, and then we transfer them to our promi. We so click once on home, then on settings and on E Tron. Now we look for the PD. Values ​​and. They are down here, B and D here. Let’s enter our new values ​​now. Finally, we press save changes up here and look at the whole thing once in the console and we see settings down here That means everything worked with the new values. ​​are saved the same could be, of course, now, also for the steps for the extruder, you would do that. Simply set. The desired temperature for the extruder under status would like to take that now, for example with PDA. If you now have if adjust degree afterwards, we would then go back and the print comments here could only be 110 button or the jeep insert that it should explode 100 millimeters. This one millimeter one would then explode and measure how many actually exploded and then simply use the appropriate formula to find the value in the room below and taxi’s resolution. Adjust this step and you would have. It escalated. How to do it exactly? I have even made a video that I will link to you there. Click on it. You will see the formula for calculating Denise Tips. But we’re not finished yet, and I still have a little one. Now, bonus for you and you may have already seen. I have one here too. Small webcam still included. But I have to say beforehand. Beware of this function with the webcam can only be used. If you have the pro version of Reputeer server. Has I have to say I bought the profession for 60 euro and have not regretted it yet? Many thanks to the one brings silly something from him. I have this holder for the period of the x1 downloaded. This holder is simply on the side of the Amex profile of the time when the x1 is mounted. There is this holder that guides this webcam, but also in any other design back in the rapidler server surface, see you. We are already in the Citrix 1 again. Then we go up here right again. On the printer settings tab and next, let’s select the tab webcam above webcam support. We see we have no webcam added yet. That means we click here once on the button, add webcam. Now we see webcam 1 up here and next. Let’s press the button to point down here and it was so easy it was already We see our webcam is now with connected to the Wifi. We still have one problem and that is ours. Picture upside down for this. We go once to press down in alignment once on the symbol that is rotated 180 degrees and we’re done ours. The image is displayed correctly and our webcam is integrated. Finally, we press save configuration again and we are done back in the surface of the sidewinder x1 We now have it up here. The tab webcam and our webcam is now shown here. Should the picture jerking? The webcam is not a problem. We go back to the printer settings, go to the webcam tab and here we can now use the. Change the resolution of the webcam that is, of course clearly higher resolution. The more likely the picture jerks that is. If it should jerk, just go down a bit with the resolution and the problem should be resolved. His and the nice thing is, Of course, the whole thing also works on the smartphone, so we’re done with one basic settings. And now you can almost say my three favorites functions are among other things. The temperature curve that you really are nice to see if you have too strong temperature fluctuations the second the function is the webcam monitoring how? I think it’s really great that you are. There can really see exactly how to continue printing, and even if you are not directly next to the printer and of course, that you can print your values ​​directly via the display setting, then you do not need any. I already had this display connected to a separate computer for this on both SV 0 1 am. Artillery videos and Amazon Recycler x1 at the end return on end three mega at the end 5 pro at the end five, plus at the sef firepro at the safe A plus. So I don’t have a printer in this room where I have. This display could not start with finally. I want to say that I always feel a little weird when I edit my 3d files. Do not give away. I hope, but most of you do not understand and sees it as a kind of thank you or a kind of support for me that I will continue to do such time-consuming projects for you in the future. I want everyone to be able to implement the at least one has the possibility to construct such a housing by himself and for it. I will always show you exactly in the next construction video, how to construct such a housing from scratch. You can see me on a table. I’ve also printed a lot of prototypes, of course, which, of course, not at first have worked where I then had to improve a little where I did. I had to take another measure and still have to take three display. Housings completely finished. I only need one thing, Of course, that is this one both housings that are now down here. That are completely finished. I want to raffle this video. That means just write in the below comments. Raspberry Pi purely and two of these comments. I will then select, and you will get a completely finished. One here printed out display case sent by me. I hope you have this one tutorial, and I was able to show you step by step how you do connect this display and the Raspberry Pi to a printer, if still. If you have any questions, please write in the comments below and I’ll be there. I then try to answer these questions. I say many many thanks subscribe to a channel. If you haven’t already have made the video synonymous gladly in the thumb up if you are good and actually hopefully in the next video, this one selector disturbed display. Should you turn that way up to here? Everything is right now. Asked you to connect to the Wifi, and that’s why we’re going there once had stands behind me and stands behind me. [MUSIC].

3d Printed Master Chief Helmet | 3d Printed Halo Helmet

Transcript: Hey, how's it going, guys? Just, uh, thought I would share with you. A project I've been working on. This is my master chief or your halo mark 6 helmet. And this was 3d printed on my ender threes. Uh, so I've got an Ender, Three and Ender, Three pro. And,...

read more