3d Printed Gamecube Controller | 3d Printed Gamecube Classic Mini

make game stuff

Subscribe Here





3d Printed Gamecube Classic Mini


So this is the final. Gamecube Mini Classic. Whatever we’re going to call it and there’s a 3d printed enclosure containing an nuc style computer and so it’s an i3 which is perfectly sufficient for running dolphin for Gamecube emulation. So in terms of size, there’s not a lot. I could do really with the size after this because the motherboard’s, obviously basically the same size as this piece and I wanted to retain having four ports along the front. So how much smaller, you know, you’re going to struggle to fit all of that in. So the top half contains the the controller’s adapter board and little USB hub within that, and then the lower half, obviously as the motherboard piece within it. There’s a new power button that’s been added in the top, some translucent 3d printed piece in here, so the LED sits under lights up on the front and the back of it, then IC has all of our ports, and I had to settle for this solution in the end, which was an idea. I didn’t really want to solder onto one of the USB headers on the board because then the board would like to remove that port actually to get that in, so it’s just a little loop back from one of the USB ports that goes underneath and then to the top half of the controllers. But I couldn’t. I can live with that piece on the back and so say yes. That the original design was from Thingiverse it was a Raspberry Pi enclosure originally, and then it’s been sort of resized adapted. The interments changed around so that it would fit in all of these pieces printed all in PLA that print times only about four hours on this. They’re not too bad and I’ve got the files that I did linked in the description below and so feel free to adapt lament as you wish if you want to make something like this. But compared to the original, it’s quite a size reduction. It’s not anywhere near as small as the snows many years, but then it’s kind of comfortable with the size, so it’s in white because originally this was just a test print. Actually, this was a neat test print that I was going to do, but I kind of liked. It carried away, so I’ve kept it in white, which is cool, so I got four white controllers, so that kind of works with it, so I’ll show you some games running on it now and how it performs you so running? Windows 10 Let’s launch up dolphin here and then just run through a few games and show you how they they’re running moment. I say as the GP is preformed. This we’ve not bothered with many enhancements in terms of extra resolution. Anything like that, but em, they say everything runs pretty good. [MUSIC] [APPLAUSE] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [MUSIC] [Music] [Music] [Music] [Music] [Music] You?

3d Printed Master Chief Helmet | 3d Printed Halo Helmet

Transcript: Hey, how's it going, guys? Just, uh, thought I would share with you. A project I've been working on. This is my master chief or your halo mark 6 helmet. And this was 3d printed on my ender threes. Uh, so I've got an Ender, Three and Ender, Three pro. And,...

read more