Featured Posts

Transcript: [MUSIC] So [Music] so [Music]! Hey, everyone, my name is iselle. Maurice, David. And today I'm gonna show you how I made my 3d model of bacterial cell. So if you're interested, then please keep on watching, starting off with a carton. I'm just measuring my...

Transcript: Thinking of changing your into three build surface. Well, here's a comparison of three different options. [MUSIC] [Music] into threes Come with a fake bill tech surface as you see here now. The earlier ones had it stuck onto the metal plate. The later ones...

Transcript: In this blender tutorial, I will show you how to join objects, faces, edges and vertices. Other tutorials can be found in my playlists. Okay, well, I'm going to assume you've got limited knowledge of working in blender, but obviously have a basic...

Transcript: Hey, guys, hope you all doing. We'll, hope you had an awesome. Christmas, I know I did. I basically just say a load of food and just took a bit of a break and it is nice to get a break from your usual routine, but today. I'm back again with another video,...

Transcript: 3d printing technology is immensely popular and is making rapid advancements. But have you ever wondered what are its advantages and disadvantages? This Buzzle Post tells you how we can benefit from this technology and also its possible negative effects....

Transcript: So now we have the proofs. Am k2 and the Prusa Mk3. Let's race them. Okay, so it's not gonna be much of a race because I'm pretty sure the Mk3 can beat the MK2 on speed, but I do want to kick off a print at the same time and compare the results. So what...

Transcript: Hello, everyone bill here. From high ground tiles would like to show you the new design of the high ground tiles before we had a press end fit and we've redesigned that to be a clip and fit. It's a little bit better design, and it holds the game board...

Transcript: [MUSIC] This is a photo booth with a rotating platform and it's ideal for showing off smaller sized objects in a cool and intriguing way for me. It'll most likely be used to showcase 3d prints and electronics projects. But you could use it for almost...

Transcript: Hey, guys! I recently started 3d printing with ABS plastic, and I had a lot of trouble with parts spending off the build platform. And you can see here. This one should be a flat surface, but it's apparently not that straight as you can see, and I tried a...

Transcript: Hi, everybody and welcome to the 3d print zone in this video. I'm going to be reviewing the Monoprice maker Pro 3d printer. I'm going to talk about some of the specifications and the features that this machine has to offer. And then I'm going to talk about...

Transcript: Hi. I'm Alex and welcome to Super Make something today. We're making a 3d printed business card dispenser as I get ready for the Cleveland Mini Maker Faire. Let's get started. I will be attending the Cleveland Mini-maker Faire at the Cleveland Public...

Transcript: Hey, I'm Alec. And today on 3d printing troubleshooting guide, we're gonna talk about layer shifts. If you've been finding these videos helpful, don't forget to subscribe to the channel to stay up to date with all the solutions to the many areas you may...

Transcript: This is our 3d printer. We use it to perform magical, summoning rituals that summon 3d objects out of thin air, actually. J, it's kind of more like alchemy checkout. You take this and you turn it into into this. This is a dungeon tile and we use them...

Transcript: Hey, guys, so a couple weeks ago. I posted a video Instagram carving the steel metric drawer front. I got a bunch of questions on what software I use and how to set it up, so I figured this would be a good opportunity to make a quick and easy tutorial on...

Transcript: So at the core every 3d we are a social enterprise. We endeavor to make 3d printing more accessible. What we've found over the last few years is the feedstock is not accessible to people so to truly get this beyond just the areas where people have access...

Transcript: Hi, guys! I'm Benny, and this is my brother Jacob. Oh, sorry, hi, so while. Svetlana is working on her Gos's rifle from Fallout 4 We decided to 3d print her pitbull and how we did that. You can see now that we. D model, we use our printers from the website...

Transcript: [MUSIC] Hey, guys, welcome to our quality! Channel today we will do a beer touch installation tutorial on our end of three pole for the people who are new. All they need a refresh, lets. Open the boss and see what inside we have the menu. Be our touch...

Transcript: Hello, Youtube and welcome to your first geek trip today. We'll be strolling down the 3d printer lane, with my review of the monoprice maker select an inexpensive 3d printer with tons of features. But is it too good to be true? Take the trip with me trip...

Transcript: Hey, guys, welcome back to chaos cortex. So you may have noticed that this is not one of my normal model videos, and that is because today's model is not one of my normal models so today we're going to be making something that's functional, but still super...

Transcript: Hello, and welcome to our first episode about the FTM printed SLA printer. It's about these at Gantry first. An overview about the parks we need mainly consists of three 3d printed parts. First one will make our build plate. I have glued some five million...

Transcript: Shut up, you don't think. Ryan is famous cousin. True gunner. Hey, what's up my? Youtube, friends and family, its cousin. Ryan and I just wanted to make a quick 3d printing video, not so much focusing on what I printed, but what I printed with? I picked up...

Transcript: Getting a good first layer is cruical and it's the most common question I see from beginners. The problem is that everybody is showing you how to do it with a piece of paper? I mean, it's good as a rough guide, but there's a better way that's much more...

Transcript: Everyone always says. Joel, why don't you put practical things? Why don't you print useful things? Why don't you stop printing pokemons and print normal stuff, awesome stuff, useful things. So I did I printed. One of these might say what it is, and we're...

Transcript: Pew-pew one of our viewers. Dennis said, please make a helmet so in today's video. I'm gonna make an Atlas battle, mech. I'm in Thingiverse now. I'm going to type in Atlas battle neck. OK, I'm gonna go to this. One looks pretty close of me. We have this...

Transcript: Hey, it's! Joel, the 3d printing nerd. And now is as good a time as ever to put your printer through a printer. Torture test. That's right, we're gonna torture your 3d printer. You ready, go? Alright, alright, we're not actually literally going to take...

Transcript: Hello, my name is. Freddie, and this is my first attempt at starting a 3d printing Youtube channel. Today I'm going to print Yangs and Basilica from the roosterteeth show Ruby or Rawabi. But you can probably tell that from the title of this video. I...

Transcript: Hi, guy's, seeing and this time. I've been printing the Batman Beyond statue from my good pal Tarek Sabre [Music] [Music]. So we chatting with Tarek. He mentioned that a lot of people struggle knowing how to slice prepare for Prince and his statues and so....

Transcript: Have you ever wondered what happens when you leave your? PLA 3d prints outside at the mercy of the elements. Well, the results are pretty interesting. I've been 3d printing for quite some time. And at the beginning of 2017 I produced a range of 3d printed...

Transcript: This is the joy bonnet from. Adafruit it's designed to fit on top of a Raspberry Pi zero. So you can make some really cool retro pie projects this week. We designed a case to make a classic looking game controller in this video. We'll take a look at the...

Transcript: [MUSIC] Hey, welcome to the dojo today! We're gonna take some fan-made 3d models and make them into. Final Fantasy, seven inspired minis for your tabletop games or at Final Fantasy homebrew campaign. Or your desk or for fun. You probably recognize the...

Transcript: Wouldn't it be great If you could create a 3d design on an iPad, send it into the cloud. It would slice it automatically and print it on a sub $500 fully assembled 3d printer without all the technical setup. You can do it on a flashforge adventurer 3 and...

Transcript: [MUSIC] Hello guy's, Winston here today. I want to talk about STL files. Stereo lithography standard tessellation language, Whatever it stands for STL files are about as ubiquitous on the Internet as PDF documents. The ability to carve these files opens up...

Transcript: So here's the task at hand. Um, I have the fine crap on brand of tool set. It's actually just the mishmash of, uh, harbor fright. Uh, and, uh, Craftsman tools, and whatever else I have happen to buy at the time, whatever I needed, I try not to be too much...

Transcript: [MUSIC] Hey, guys, how's it going? Edit here again. In today's video, we are going to be building and hopefully printing but probably not in the same day, but in today's video, What am I saying a 3d printer? So this was sent to me by gearbest on Saturday...

Transcript: Just kidding, guys. Uh, I just I love this helmet. It worked out so well. What is up, you guys? Uh, if you are just now joining this journey, Check my playlist of all the iron man suits. You're going to love it as I'm going and learning, but what I've got...

Transcript: So if you have an Apple watch and an iPhone and you're sick of the cable sliding off your nightstand here and you don't feel like going and buying a brand new stand for everything and things just fall off like that. Well, let's fix that [Music] [Music]...

Transcript: Hello 3D Printing Friends! Today on the BV3D Channel, I'm gonna have an update on my Ender 3 Pro review. Stick around and we'll get into it, right after this. I'm Bryan, and you... are watching BV3D! Hi everyone welcome back. In my recent Ender 3 Pro...

Transcript: Have you ever wondered how they create those 3d images inside crystals? Yeah, me too. Unfortunately, it wasn't a single good video on Youtube, explaining it. So I decided to make one welcome to make his muse. That's going, guys, My name is Angus and...

Transcript: In a previous video I showed how I was getting really good prints with my Cura profile with the filament fan turned off. But on a Creality Ender 3, turning that fan off actually turns off the electronics fan which is not good. So I'll show you a quick fix...

Transcript: [MUSIC] Hey, guys, welcome to redefine. My name is RO. In this video. We are going to discuss in details difficult types of MDM theaters. I hope you guys have watched every video on the basics of this is reading and all your KPM theater. If not, I...