3d Scanning With Kinect V2 | How To 3d Scan And Print Yourself With Kinect V2 And A 3d Printer

Caroline Dunn

Subscribe Here

Likes

61

Views

2,082

How To 3d Scan And Print Yourself With Kinect V2 And A 3d Printer

Transcript:

[music] hello! My name is Caroline in this video. I am taking this Xbox connect. This originally went to an Xbox one. And I’m going to show you how to make a 3d bust of yourself with this. Connect, I’ll show you all the parts that you need and what software to install in order to create a 3d bust of yourself. Now, let’s get started. [MUSIC] And I’m going to start a screen recording and we’re going to get started with this right now. I’m going to link to this website in the description field below, but honestly, the way I found it was I just typed in connect SDK, and this was a Google result and I downloaded the connect for Windows Sdk 2.0 I went through and installed this now. If you’re not familiar with how to install it, it has a system requirements. This is for a windows. I’m on Windows 10 It says it’s for Windows 8 8.1 so it does mostly work with a windows 10 device. You need a 64-bit processor 4 gigs of memory, physical, dual-core 3.1 Gigahertz and a capable graphics adapter. You’re going to go through, download this then. According to the instructions, then you want to connect the connect. I’m going to quickly. Go over how we plug in the Xbox to our laptop windows computer. Now when you take a look at this Xbox Version 2 or the one that goes with the Xbox one, you’ll see This is the connector and I don’t. Have this kind of connector on my laptop. Thus, I’m going to get one of these connect adapters and this is one I purchased off Amazon and it has several components to it and there are instructions on how to plug it in and it comes with this converter adapter box as such and from our Xbox Connect module, there is a plug plug that in we need to power this up and it does come with a power cord. Power cord has a power brick and I’m going to plug in the power, and then I’ve got a power strip here here. I’ll plug that in and that powers that up now we need to connect this to the USB on our laptop, and there is a connector that plugs in like this, and then we’ll plug this USB end into our laptop computer, and that is how we connect the connect to our windows device. It should automatically download the drivers and it may require a reboot Now. The thing that you need to check when you believe you have everything installed, is you go into device manager? Then you should see connect sensor devices. You want to open that up, so press the little arrow key and then WDF connect sensor interface. 0 you want to right, click on that, and you may need to update your driver. If you need to do so, then you will just update it with recommended settings. Once you finish that you may need to reboot again now. The next thing you need. Is you need a program called 3d scan? Now on my computer, 3d skin was already installed. I’m not sure if I happen to install it through something else. Or if it came pre-installed, I’m not really sure how that happened or what happened there. If you don’t have 3d scan already installed, it is a free download. I’m going to go into the app store and I’m going to go search for 3d scan and it’s already installed. If it wasn’t installed, I would go through and I would hit install. It would install, And then I would launch it. Here is 3d scan, and this is the program that scans your body. What I learned about 3d scan was to adjust the depth. So if it’s in black and white, it’s not going to scan if it’s in color, it will scan, But you don’t want to scan your background. There is a minimum depth of 0.7 I’m assuming that’s meters. It doesn’t really say here set it to about one if it is it, that means it’s scanning the wall because the wall is in color or because it’s lighted up. We want to have the depth so it’s. Just my face is in color, Just my body that I’m going to scan the width. You can adjust the width wider. Adjust it to where you want to be all right, and then you can rotate, so I don’t advise you to rotate, and if you’re doing this by yourself, you’re going to want to do timer. I’m going to show you in the next step. Exactly how I did this. You don’t want your depth too far. Otherwise, you’ll be scanning the wall and it will think that it needs to 3d render that you really want to set your depth as shallow as possible and your width and height as small as possible. Just so that it’s just you because you’re scanning just yourself. I’m going to show you in the next step. How we actually do that. Okay, so the connect is right here. My laptop’s right here. I’m going to start the scan, okay. Paul’s going to get back in position. You’re going to see what I’m doing on the computer here, and we’re going to try to do a scan, so he’s going to spin around several times. All right, very slowly, He’s going to start spinning around and I’m going to hit the scan button here, and Paul is going to start turning around very slowly and yeah. This is the connect. [MUSIC] I’m going to hit the stop button processing frames right now, and it’s going to spit out a 3mf which can be read by Kira. Stay tuned and we’ll be right back Next. We’re going to try to scan my face. There is quite a bit of trial and error. We’re going to keep on doing this until we can get a good scan. Uh, Paul, and we’re gonna try a scan of myself next, and I’m gonna show you how you can do this by yourself. I’m gonna move my connect in front of the camera. I’m gonna spin around in this rolling chair now. [MUSIC] In the last scene, you saw me turn around and do a 3d scan of myself. Now I have previewed the 3d scan the second 3d scan. I did on the rolling chair on. The swivel chair worked out a lot better. So I’m going to use that scan in this video. I’m going to show you how I edit it so that I can print it out. What I’m going to do now? Is I’m downloading 3d builder? I have installed 3d builder from the Windows App store. Same way I installed 3d scan. I’m going to hit launch now, and we’re going to go to caroline2 here. I am invalidly defined. Click here to appear, all right, so I’m going to repair my file, all right. It looks like I’m done repairing my file. I’ll hit edit. I’m going to do the line. I want to move this down a bit. I think right there, keep top split and let’s see if I can do a save as file. I’m going to hit save as I’m going to call this Caroline 2a save. I’m going to import my Caroline to a file. And, of course it is too big, all right, so I need to select all models sizing. I’m going to go to 400 that’s my size and then move this over to 0 0 0 and see if that works, all right, and there I am so. How big am I now? I’m 40 by 25 Maybe I’ll make myself a little bit larger here. All right, there I go and lets, uh, select my profile and let’s slice this up and this is my bust. It’s slicing it up, and it says 1 hour and 35 minutes. I’ll hit print with octoprint and I can go over to my octoprint now and let’s see if we can get that started. I’m gonna hit print and we’ll wait for it to heat up and I’ll start printing and yeah, we’ll check it out. We’ll be back in a couple hours and I’ll show you the final outputs. [music] you!

Steam Engine 3d Printer | 3d Printing A Steam Engine

Transcript: Hey, what's up it's treaty and we have a new addition for engineering family. His name is three P or EEP. I think three P and he can almost build some really cool stuff. For example, after printing up the default cube. The first thing I printed out Was...

read more